Category: Transport

Posted on

The SOLLERS Group presented the new Sollers SF1 minibus.

Translation. Region: Russian Federation –

Source: Sollers – An important disclaimer is at the bottom of this article.

The SOLLERS Group unveiled the new seven-seat Sollers SF1 minibus. The passenger version of the model was unveiled on December 11 in Moscow.

The new SF1 model was the main premiere at an event dedicated to the Sollers passenger transport lineup, which also featured discussions on the development of transport mobility and passenger transportation. The event was attended by Adil Shirinov, Chairman of the Board of Directors of PJSC SOLLERS, invited experts in the transport and automotive industries, as well as the company's clients and partners.

The Sollers SF1 minibus is designed to carry 6 passengers in a 2x2x3 layout. Thanks to its passenger car dimensions, 1.9 m height, and increased maneuverability, the vehicle is ideal for driving in dense city traffic and entering underground parking lots.

"The passenger version of the Sollers SF1 is aimed at both private owners for family trips and fleet customers for commercial use. Given the high level of localization from the very start of production, the new minibus will meet the requirements of the Russian Ministry of Industry and Trade for participation in state programs for preferential car loans and leasing, as well as for inclusion in the register of vehicles approved for use as taxis. These support measures will make purchasing a Sollers SF1 as accessible as possible for all categories of consumers," commented Marat Sharapov, Director of Sales and Marketing at SOLLERS.

The Sollers SF1 is equipped with a 1.5-liter turbocharged gasoline engine producing 136 hp. The engine meets Euro 5 emissions standards and is paired with a five-speed manual transmission.

The cabin's rich basic equipment includes two front airbags, an anti-lock braking system (ABS), ultrasonic rear parking sensors, electric side windows and mirrors, air conditioning, a standard audio system with USB and MP3 support, heated seats for the driver, front passenger and steering wheel, fog lights and LED daytime running lights.

The interior features an additional heater, seats with wear-resistant fabric upholstery, cup holders, and ports for charging devices in the side panels.

Serial production of Sollers SF1 minibuses using full-cycle technology is planned to begin at the SOLLERS plant in Yelabuga in the first quarter of 2026.

Please note: This information is raw content obtained directly from the source. It represents an accurate account of the source's assertions and does not necessarily reflect the position of MIL-OSI or its clients.

Posted on

Sales of Sollers SA6 buses have begun in Russia.

Translation. Region: Russian Federation –

Source: Sollers – An important disclaimer is at the bottom of this article.

SOLLERS announces the launch of sales of the Sollers SA6 bus. The 9-meter model is available from the brand's dealers, starting at 10,700,000 rubles.

The Sollers SA6 is the second model in the company's line of tourist and intercity buses, offering broad commercial potential. This bus is ideal not only for tourist and excursion routes, but also for intercity regional transportation, as well as for corporate transportation for company and organization employees. Its compact dimensions, reliable powertrain, and fuel-efficient components ensure efficient operation on Russian roads.

The bus's structural foundation is a durable and lightweight monocoque body, with a curb weight that's among the best in its class. To ensure corrosion resistance, all structural components undergo a full cataphoretic treatment, and the exterior panels are made of aluminum and plastic.

The Sollers SA6 is equipped with a 6.5-liter diesel engine producing 245 hp and a six-speed manual transmission. Standard equipment includes ABS and ESC electronic systems.

The spacious 35-passenger cabin is designed for comfortable travel. It features ergonomically designed soft seats with reclining backs, USB ports, a modern climate control system with air conditioning, improved noise and vibration insulation, and LED lighting. Luggage compartments offer a total volume of 3.3 m³.

The new model is available for order and purchase at Sollers dealerships starting at 12,700,000 rubles. The Sollers SA6 bus is also included in the Russian Ministry of Industry and Trade's preferential leasing program, providing a special discount of up to 2,000,000 rubles. Therefore, taking into account the special offer, the minimum price of the Sollers SA6 is 10,700,000 rubles.

The first copy of Sollers SA6 has already been delivered to a client from Moscow.

Please note: This information is raw content obtained directly from the source. It represents an accurate account of the source's assertions and does not necessarily reflect the position of MIL-OSI or its clients.

Posted on

SOLLERS Group announces new personnel appointments aimed at strengthening the company's management resources for the development of new product production and the further modernization of the Group's industrial sites.

Translation. Region: Russian Federation –

Source: Sollers – An important disclaimer is at the bottom of this article.

From February 1, 2026, two new positions of Deputy General Director will appear in the organizational structure of PJSC SOLLERS.

Alexey Matasov, CEO of SOLLERS Alabuga LLC, will assume the position of Deputy General Director for Industrial Infrastructure Development and New Industrial Projects. His responsibilities will include projects to modernize and create new production capacities and technological upgrades at all of the group's industrial sites, as well as optimizing and improving the efficiency of the sites' utility infrastructure.

Alexey Spirin, former head of the Ulyanovsk Automobile Plant, will assume the second position of Deputy General Director for Production and Quality at SOLLERS PJSC. His role will involve the implementation of a unified production system, production and quality management standards across all industrial projects, and oversight of the production program.

At the same time, Ilnur Sakhabiev, who is the head of the Zavolzhsky Motor Plant and also led projects for the production of new diesel engines and SOLLERS gearboxes, will be appointed to the position of General Director of UAZ LLC as of February 1 of this year.

"We are currently implementing the largest projects in the history of SOLLERS: launching new vehicle production, creating new component production facilities, and comprehensively reengineering and modernizing UAZ and ZMZ industrial sites. Such a comprehensive transformation in such a short timeframe requires maximum concentration of our management resources and the simultaneous deployment of our managers' unique competencies across all production units and projects," noted Adil Shirinov, Chairman of the Board of Directors of PJSC SOLLERS. "Our goal is to ensure that the best practices of each industrial division and the synergies existing between them are utilized as effectively as possible within the SOLLERS Group. And a key role here will, of course, be played by our most experienced production leaders, who will now have greater authority and opportunities to manage end-to-end and cross-functional projects across all enterprises," explained Adil Shirinov.

Please note: This information is raw content obtained directly from the source. It represents an accurate account of the source's assertions and does not necessarily reflect the position of MIL-OSI or its clients.

Posted on

The Sollers SF1 passenger minivan is available for pre-order.

Translation. Region: Russian Federation –

Source: Sollers – An important disclaimer is at the bottom of this article.

SOLLERS announces the start of pre-orders for the new seven-seat Sollers SF1 passenger minivan. The vehicle is available for order at dealerships starting at 2,250,000 rubles.

The new model will be included in the list of vehicles approved by the Russian Ministry of Industry and Trade for use as taxis.

The Sollers SF1 passenger version is a versatile solution for families and businesses. The minivan's 2x2x3 configuration seats six passengers and easily adapts to any needs, from daily family trips to commercial transport. Ergonomic, separate second-row seats with longitudinal adjustment and 50/50-split folding third-row backrests provide passenger comfort and flexibility, allowing for increased luggage space.

This minivan combines maneuverability for city driving and practicality for long-distance travel. At 5.1 meters long and 1.9 meters tall, it's ideal for navigating dense city traffic and underground parking.

The Sollers SF1 is equipped with a 1.5-liter turbocharged gasoline engine producing 136 hp, running on AI-92 gasoline and meeting the Euro-5 emission standard. The engine is mated to a five-speed manual transmission.

The basic configuration of the minivan includes two airbags, ABS, disc brakes on all wheels, air conditioning, heated steering wheel, front seats, mirrors and washer nozzles, ultrasonic rear parking sensors, electric side windows and mirrors, a standard audio system, fog lights and LED daytime running lights.

The passenger version of the Sollers SF1 is available for pre-order at the brand's official dealerships, starting at 2,250,000 rubles.

Please note: This information is raw content obtained directly from the source. It represents an accurate account of the source's assertions and does not necessarily reflect the position of MIL-OSI or its clients.

Posted on

The SOLLERS Group has begun full-cycle production of the Sollers SF1 minivan in Yelabuga.

Translation. Region: Russian Federation –

Source: Sollers – An important disclaimer is at the bottom of this article.

Serial production of the seven-seat passenger version of the Sollers SF1 has begun at the SOLLERS Alabuga plant. The vehicle will be included in the list of vehicles approved by the Russian Ministry of Industry and Trade for taxi service.

The Sollers SF1 passenger car model joins the brand's extensive lineup, manufactured on the company's comprehensive assembly line. Production of the model is organized using a full-cycle process that includes all key stages: welding and anti-corrosion cataphoresis immersion treatment of the body, painting, and final assembly.

Each vehicle undergoes a comprehensive inspection, including an inspection of components, assemblies, and electrical systems, an inspection of the interior, and an assessment of the paintwork and weld quality. A mandatory step is a leak test in a rain chamber under conditions simulating a tropical downpour, as well as a performance test on a special track with speed bumps to evaluate suspension performance and identify potential extraneous noise.

As part of the new model's production organization, the plant modernized the side window gluing section and introduced additional operations for equipping the passenger compartment, including the installation of seats, the climate control system, and interior elements.

The Sollers SF1, designed to carry six passengers, combines the maneuverability of a passenger car with the practicality of a large minibus, and its overall height of 1.9 m allows it to enter underground parking.

Under the hood of the minivan is a 1.5-liter turbocharged engine producing 136 hp, compliant with the Euro-5 standard and adapted to run on AI-92 gasoline. It is paired with a five-speed manual transmission. Even the base trim level offers a wide range of options: front airbags, ABS, ESC, disc brakes on all wheels, air conditioning, heated steering wheel, front seats, mirrors, and washer nozzles, rear parking sensors, power side windows and mirrors, a standard audio system, fog lights, and LED daytime running lights.

The passenger version of the Sollers SF1 is now available for order at the brand's dealerships, priced at 2,250,000 rubles. The first production minivans will go on sale in the spring of 2026.

Please note: This information is raw content obtained directly from the source. It represents an accurate account of the source's assertions and does not necessarily reflect the position of MIL-OSI or its clients.

Posted on

NEFAZ celebrated the anniversary of bus assembly shop No. 23.

Translation. Region: Russian Federation –

Source: KAMAZ – An important disclaimer is at the bottom of this article.

In March, Bus Assembly Shop No. 23 at NEFAZ, a KAMAZ subsidiary in Bashkortostan, celebrated its 25th anniversary. It is here that completed NEFAZ buses, trolleybuses, and KAMAZ electric buses are dispatched.

The workshop's origins date back to 2000, when the "Program for the Development of Passenger Buses on the KAMAZ Chassis" was adopted. By 2001, the preparatory and welding shop had already begun operations, followed by the paint and assembly shop a few months later. In 2003, a reorganization took place: the assembly and paint shop was divided into two separate divisions. Bus Assembly Shop No. 23 then became solely responsible for assembly work, the final stage of the production process, where individual parts and assemblies are assembled into finished products.

Based on its main functions, the workshop is divided into seven sections: electrical harness manufacturing, small component subassembly, glazing, advanced model assembly, the main conveyor line, a finishing and finished product delivery section, and a small assembly section.

Today, the workshop employs 705 people, with an average age of 35-40. The primary specialty is mechanical assembly mechanics, along with electrical fitters, automation and process equipment electricians, painters, test drivers, washer-dryers, pickers, transporters, computer operators, storekeepers, and work assigners. All of them work under the supervision and support of the quality departments, the chief designer, and the chief technologist. Foremen staff each post.

The current capacity of the bus assembly plant is approximately 1,600 buses and electric buses per year. A total of 15 passenger vehicle models are assembled here. From 2001 to 2025, 23,290 buses and 2,462 electric buses were manufactured. The plan is to increase production capacity to 3,000 buses per year by 2027.

Please note: This information is raw content obtained directly from the source. It represents an accurate account of the source's assertions and does not necessarily reflect the position of MIL-OSI or its clients.

Posted on

Africa is just a stone's throw away, if KMZ Cargo is involved.

Translation. Region: Russian Federation –

Source: KMZ Cargo – KMZ CARGO –

An important disclaimer is at the bottom of this article.

When shipping cargo to Africa, it's important to combine professional documentation with smart route planning. You can always find this combination by contacting KMZ Cargo (part of the military-industrial holding company) Kinigsepp Machine-Building Plant). The company's specialists understand the customs requirements of different countries and will help you choose the right type of transport.

Sea and air transport are two key modes of transport, each with its own advantages and limitations. The optimal option depends on the type of cargo, timeframe, and budget.

If goods need to be delivered quickly, air freight is the best choice. Delivery can be completed within two to five days. In addition to speed, air freight ensures high levels of safety and allows for the transportation of goods with special requirements, making it ideal for medications, food products, and other similar items.

For heavy or oversized cargo, sea transport is a more cost-effective and reliable option. The main routes depart from the ports of St. Petersburg, Ust-Luga, and Novorossiysk. Sea freight also offers the option of turnkey orders or staged delivery (customs clearance, terminal operations, etc.). Transit times range from 20 to 70 days depending on the country, and planning accordingly is the key to successful deliveries and efficient inventory management.

Contact KMZ Cargo to deliver your cargo to any corner of the planet!

Publication date: 03/12/2026

Please note; this information is raw content obtained directly from the information source. It is an accurate account of what the source claims, and does not necessarily reflect the position of MIL-OSI or its clients.

Posted on

KAMAZ-LEASING became a laureate of the Financial Elite of Russia award.

Translation. Region: Russian Federation –

Source: KAMAZ – An important disclaimer is at the bottom of this article.

The awards ceremony for the 20th anniversary "Financial Elite of Russia 2025" award winners was held in Moscow. KAMAZ Leasing Company was named the winner in the "Auto Leasing Company of the Year" category.

This award reflects the high reputation of KAMAZ Leasing Company, which has been present in the leasing market since 2002. During this time, the KAMAZ subsidiary has sold more than 80,000 units of equipment.

The diploma was ceremoniously presented to Andrey Gladkov, CEO of KAMAZ Leasing Company. The annual "Financial Elite of Russia" award has been presented since 2005 and is one of the most prestigious in the financial market.

Please note: This information is raw content obtained directly from the source. It represents an accurate account of the source's assertions and does not necessarily reflect the position of MIL-OSI or its clients.

Posted on

Vladimir Putin awarded state awards to AVTOTOR employees.

Translation. Region: Russian Federation –

Vladimir Putin awarded state awards to AVTOTOR employees

Source: AVTOTOR – Avtotor motor vehicles – An important disclaimer is at the bottom of this article.

AVTOTOR employees have been awarded high state awards. By Decree No. 79O of February 14, 2026, Russian President Vladimir Putin recognized the achievements and long-term conscientious work of representatives of one of the largest enterprises in the Kaliningrad Region. The Order "For Merit to the Fatherland," 1st Class, was awarded to AVTOTOR Senior Vice President and Technical Director German Titov.

The Medal of the Order “For Merit to the Fatherland”, 2nd degree, was awarded to the Director of the General Customer Department – Project Director of AVTOTOR Holding LLC, Sergey Lomovtsev.

The awardees are AVTOTOR veterans. For many years, they have led strategically important projects for the development of the company and the entire automotive industry.

Their significant contribution to the implementation of the project to create an Automotive Components and Electric Vehicle Cluster in the Kaliningrad Region was particularly noted. This project is being implemented under a special investment contract (SPIC) concluded with the Ministry of Industry and Trade of the Russian Federation and the Government of the Kaliningrad Region with the support of the Industrial Development Fund and Russian credit institutions. The contract is aimed at creating a highly localized production base, developing technological competencies, and accelerating import substitution processes in key segments of the automotive industry.

German Titov is leading a comprehensive program to create new high-tech production facilities, modernize, and consistently increase localization of production. This enables the company to implement its plan to transition to advanced full-cycle automobile production, creates a foundation for enhancing the company's competitiveness, and serves the interests of the domestic automotive industry. German Vitalyevich has been with AVTOTOR since 2007 and was awarded the "For Valiant Labor in the AVTOTOR Group" medals, 2nd and 3rd class, and received a commendation from the Ministry of Industry and Trade of the Russian Federation in 2013. In 2019, he was awarded the medal of the Order "For Merit to the Fatherland," 2nd class.

Under his direct supervision, the entire production and technical-technological base was established, equipment was installed, and all technological processes were launched at the first-stage plants of the Automotive Components and Electric Vehicles Cluster. This includes seven new plants integrated into a single chain and providing a full cycle of manufacturing units, components, and assemblies, including critical ones such as electric motors and power control electronics. For several years, German Vitalyevich has also been developing and implementing a project to create a universal metallurgical complex in the Kaliningrad Region, including non-ferrous casting plants with machining and ferrous and steel casting plants with machining.

This production facility, unique to the Kaliningrad region and based on cutting-edge customized technologies unmatched in Russia and the CIS, represents a technological breakthrough in terms of developing the region's industrial potential and advancing the automotive component manufacturing industry. The creation of a flexible foundry for machining ferrous metal parts, including internal combustion engines, transmissions, and steering systems, is part of the second phase of the automotive components cluster, which will close the manufacturing chain for critical components, which is crucial for creating an independent component base.

With his many years of work and exceptional professional skills, German Titov makes a significant contribution to enhancing the competitiveness of the Russian automotive industry, developing domestic technologies, and achieving technological independence.

For outstanding achievements and many years of dedicated service, Sergey Semenovich Lomovtsev, Director of the General Customer Department and Project Director at AVTOTOR Holding LLC, was awarded the Medal of the Order "For Merit to the Fatherland," 2nd Class, by decree of the President of the Russian Federation. He has worked in the mechanical engineering industry for over 45 years. Since 2004, he has worked for the AVTOTOR Group, supporting the development of automotive production capacities and implementing the company's investment projects in the creation of strategically important production and engineering infrastructure facilities. In 2018, Sergey Semenovich Lomovtsev was awarded the honorary title of "Honored Mechanical Engineer of the Russian Federation." He has also received a Certificate of Gratitude from the Ministry of Industry and Trade of the Russian Federation and medals "For Valiant Labor in the AVTOTOR Group," 3rd, 2nd, and 1st Class.

Over the years of his work in the mechanical engineering industry, he submitted approximately three hundred rationalization proposals and registered several dozen copyright certificates.

During his tenure at AVTOTOR, Sergey Semenovich made a significant contribution to the project to establish full-scale automotive production facilities in the Kaliningrad region, implementing a number of cutting-edge technical solutions for which he personally initiated and developed them. Under his direct supervision, the construction and equipping of new production facilities, covering a total area of over 50,000 square meters, was organized, as well as the creation of a modern, highly productive automated industrial system based on cutting-edge technologies, in line with the best global practices used in the automotive industry.

For several years, Sergey Lomovtsev personally oversaw the creation of the entire production and engineering infrastructure for each of the plants within the Automotive Components Cluster. In preparation for the launch of the first phase, seven new plants, as well as buildings and facilities for technical and utility purposes, were constructed and equipped—a total of over 180,000 square meters of construction area.

In his approach to this work, Sergei Semenovich demonstrated not only the highest level of professionalism but also a deep understanding of the project's strategic significance for the industrial potential of Russia and the Kaliningrad region, employing innovative technological solutions and thereby fulfilling the objectives set at the highest government level.

AVTOTOR is proud of its veterans, dedicated professionals, mentors, and people who are passionate about the overall result. Thanks to them, the company's work traditions are preserved, high standards of professional excellence are established, and a solid foundation for future achievements is built.

The team, company management, and the Council of the Kaliningrad Regional Trade Union of Automotive Workers "AVTOTOR-Prof" congratulate their colleagues on receiving these well-deserved high state awards, which is a significant event for our entire enterprise!

Please note: This information is raw content obtained directly from the source. It represents an accurate account of the source's assertions and does not necessarily reflect the position of MIL-OSI or its clients.

Posted on

Red Wings introduced a new service for transporting animals in a neighboring seat on March 12, 2026.

Translation. Region: Russian Federation –

Source: Red Wings Airlines –

An important disclaimer is at the bottom of this article.

Red Wings is launching a new service: pet transportation on a passenger seat in the cabin. This service allows owners to place their pet's carrier next to them in a separate window seat.

One carrier with a pet weighing up to 23 kg and measuring no more than 50 x 40 x 40 cm is permitted for transportation. The rigid or semi-rigid container is installed on the seat and secured with a seat belt through the top handle.

Your pet should be able to stand upright and turn around freely inside the carrier. For safety, the carrier should only be placed on a window seat.

An extra seat is charged at the adult fare. This service can be arranged in advance through the airline's call center or partner agencies. Detailed rules for transporting animals are available on the Red Wings official website.

Please note; this information is raw content obtained directly from the information source. It is an accurate account of what the source claims, and does not necessarily reflect the position of MIL-OSI or its clients.