Translation. Region: Russian Federal
Source: Peter the Great St. Petersburg Polytechnic University –
An important disclaimer is at the bottom of this article.
The team of the Scientific and Educational Center "Digital Engineering of the Main Equipment of Chemical-Engineering Systems" of the Advanced Engineering School of Peter the Great St. Petersburg Polytechnic University "Digital Engineering" successfully completed the development and received a patent for an ignition device for reactors of oil and gas processing plants.
Patent for invention RU 2842893 C1 was registered by the Federal Service for Intellectual Property on July 3, 2025.
Leading industry research centers and strategic industrial partners of SPbPU have shown significant interest in the development. The partners of the invention were JSC TsKBM (part of the State Corporation Rosatom), LLC NTC Gazconsulting, and the Federal Research Center of Chemical Physics named after N. N. Semenov of the Russian Academy of Sciences.
Among the ultimate stakeholders in the innovative device is JSC Research Institute of Scientific Production Association LUCH (part of the State Corporation Rosatom).
Developers of ignition devices for reactors of oil and gas processing plants:
Borovkov Aleksey Ivanovich, chief designer in the key scientific and technological direction of development of St. Petersburg SPBPU “System Digital Engineering”, director of the advanced engineering school of SPBPU “Digital Engineering”;
Rozhdestvensky Oleg Igorevich, head of the Office of Technological Leadership of St. Petersburg State University;
Aristovich Yuri Valerievich, expert NOC “Digital Engineering of the Basic Equipment of Chemical and Technological Systems” Pish SPBPU;
Oganesyan Grach Varuzhanovich, chief specialist and researcher of Nutz “Digital Engineering of Basic Equipment of Chemical and Technological Systems” Pisch SPBPU;
Mikheeva Valeria Yuryevna, engineer NOC “Digital Engineering of Basic Equipment of Chemical and Technological Systems” Pisch SPBPU;
Nikolaeva Valery Andreevna, engineer NOC “Digital Engineering of the Basic Equipment of Chemical and Technological Systems” Pisch SPBPU;
Ivanov Vladislav Sergeevich, Deputy Director of the Federal Research Center of Chemical Physics named after N. N. Semenova RAS for scientific work;
Frolov Sergey Mikhailovich, head of the combustion department and explosion and head of the laboratory of the detonation of the Federal Research Center for Chemical Physics named after N. N. Semenova RAS;
Vasiliev Nikolay Dmitrievich, chief designer for remotely controlled and transport and technological equipment of JSC “Central Design Bureau”;
Marinchenko Nikita Aleksandrovich, head of the project office in shipbuilding and hydrogen energy of JSC “Central Design Bureau”;
Bondarchuk Dmitry Vitalyevich, commercial director of NTC Gazksonsalting LLC.
A critical production problem is to ensure reliable ignition of burner devices of complex process equipment, for example, an autothermal reforming reactor, during its start-up. Unsuccessful ignition can lead to the formation of explosive concentrations of a flammable mixture in subsequent elements of the process chain. This, in turn, can provoke uncontrolled exothermic reactions and, as a consequence, emergency situations with potential damage to equipment and personnel. The developed product provides a radical solution to the problem, guaranteeing stable and reliable ignition, – said the responsible executor of the development, an expert of the Scientific and Educational Center "Digital Engineering of the Main Equipment of Chemical-Engineering Systems" of the St. Petersburg Polytechnical School Yuri Aristovich.
The ignition device is a structurally and functionally unified device – a complex technical system in which all components are interconnected and jointly implement the function of igniting the combustible mixture. The device contains a housing, an oxidizer supply pipe and a combustible gas supply pipe, a spark plug, valves of the oxidizer supply pipe and the combustible gas supply pipe, an outlet pipe. The housing contains a cylindrical mixing chamber, the inputs of the oxidizer supply pipe and the combustible gas supply pipe are located in the part of the mixing chamber that is most distant from the outlet pipe.
The oxidizer feed pipe is connected to the housing so as to feed the oxidizer in the tangential direction, and the combustible gas feed pipe is connected so as to feed the combustible gas in the radial direction. The inlet openings of the pipes in the housing are made so as to ensure critical gas outflow. The dimensions of the inlet openings are reasonably selected so that when the back pressure changes, the flow rates of the combustible gas and oxidizer change proportionally, the diameter of the outlet pipe is from 10 to 50% of the diameter of the mixing chamber. The technical result is an increase in the reliability of the device.
The ignition device is designed to operate in a short-pulse mode. This ensures reliable ignition at low thermal loads in a wide range of pressures (from 1 to several tens of atmospheres). The device forms and directs small volumes of flame – fire ellipses of a certain size and at a given speed. Ignition charges ensure reliable ignition of the main burner, minimizing the thermal load on the outflow zone and the ignition device body, which significantly simplifies the reactor design and its startup procedure.
The task of developing an igniter within the established deadlines seemed extremely difficult. Initially, it was assumed that the system would be implemented with a developed cooling infrastructure and multi-component thermal protection, which is due to the extremely high operating temperatures that significantly exceed the parameters of standard devices. The specifics of the reactor excluded the possibility of using serial solutions. Alternative options were considered, including the use of pyrotechnic cartridges, but this approach was recognized as suboptimal in terms of manufacturability and operational safety. As a result, an original, reliable and safe igniter was created that meets all the requirements. The developed device demonstrates high potential for use not only within the framework of this project, but also in other industries that require reliable systems for initiating processes in high temperatures and aggressive environments, added Nikolay Vasiliev, Chief Designer for Remotely Controlled and Transport and Technological Equipment at JSC TsKBM.
Chief designer for the key scientific and technological development area of SPbPU "Systemic Digital Engineering", director of the Advanced Engineering School of SPbPU "Digital Engineering" Alexey Borovkov spoke about the key success factor: "At the beginning of the work, none of the authors of the development could foresee the final result of creating a science-intensive and high-tech product. By combining the knowledge, experience and competencies of scientists, engineers and designers from various fields of knowledge and industries, we managed to form a unique multidisciplinary team and obtain impressive results. Of course, this is a logical result of the application of systemic digital engineering technologies, including the technology of developing digital twins, mathematical and computer modeling of non-stationary nonlinear physical-mechanical and physical-chemical processes of the behavior of a high-tech product.
The development of a complex technical system is based on the effective application of the created multidisciplinary digital model [ 1, 2, 3 ], which is a system of interconnected mathematical and computer models describing combustion kinetics, chemical thermodynamics of free-radical reactions, dynamics of vortex flows at supercritical parameters of substances and non-stationary nonlinear thermomechanics. Numerous digital (virtual) tests and the necessary full-scale tests made it possible to carry out verification [ 1, 2 ] and validation [1, 2] developed models, to raise the level adequacy of models and descriptions of complex processes confirmed the efficiency and reliability of the developed high-tech product.
With the help of approaches, technologies and methods of system digital engineering, the formed innovative scientific and technical groundwork and on the basis of the digital platform for the development and application of digital twins CML-Bench® [ 1, 2 ] our team implemented all stages of creating a finished industrial product in record time: development and design took only 2 months, manufacturing and testing – 3 months. It is fundamentally important to note that traditional approaches are not capable of ensuring such a high speed of implementation of science-intensive and high-tech projects for the development of complex technical systems."
In conclusion, we note that the results of the development of the ignition device have made a significant contribution to the formation of a scientific and technological reserve for the creation digital (virtual) testing ground for burner devices. The development of a digital test site is one of the most important final goals of a large-scale project to develop new generation burner devices for pyrolysis furnaces, implemented within the framework of the key scientific and technological direction (KNTD-1) of the development of SPbPU "Systemic Digital Engineering" within the framework of the "Priority-2030" program.
The project within the framework of KNTN-1 provides for the definition of approaches to mathematical and computer modeling of new burner devices, development matrices requirements, target indicators and resource constraints, creation of a series of computer models of the prototype (primary, refined, detailed, optimized), conducting full-scale tests of a pilot industrial model of a burner device for validations computer model, development of design documentation and implementation into production.
Let us recall that in June 2025, specialists from the Scientific and Educational Center “Digital Engineering of the Main Equipment of Chemical-Engineering Systems” of the SPbPU PISh presented This project and the Center’s expertise in developing burner devices at the Gazprom Neft site, one of the leaders in the oil and gas industry and petrochemical industry in Russia.
Methodological support and the process of registering the right to the intellectual property object of the igniter were provided by Center for Transfer and Import Substitution of Advanced Digital and Manufacturing Technologies SPbPU.
Please note: This information is raw content obtained directly from the source of the information. It is an accurate report of what the source claims and does not necessarily reflect the position of MIL-OSI or its clients.
.
