Category: Moscow

Translation. Region: Russian Federal

Source: Official website of the State –

An important disclaimer is at the bottom of this article.

On July 22, a busy lecture day was held for the participants of the Summer Engineering and Economics School – 2025. Young scientists from the GGNTU named after academician M.D. Millionshchikov – a partner of the State University of Management in the project of the Advanced Engineering School "RosGeoTech" – held 2 master classes.

Assistant of the Department of Automation of Technological Processes and Production of the Institute of Power Engineering Ayub Sadulaev spoke about smart control of the water level as part of the development of a laboratory complex based on OWEN. The audience learned details about the development device: levels of automated control systems, increasing efficiency through automation of processes, features of the control system and the use of the laboratory complex in real conditions.

Assistant of the Department of Technological Machines and Equipment of the Institute of Oil and Gas Yusup Taramov presented the engineering solutions of the university, created on the basis of the engineering development center of GGNTU, and highlighted their role in the scientific and technical process. The speaker noted that the Engineering Development Center solves real engineering problems and trains a new generation of engineers in the areas of the automotive industry, mechanical engineering and unmanned aircraft systems. Yusup Taramov also spoke about examples of successful projects implemented by students and the experience of cooperation with local enterprises.

The staff of the Engineering Project Management Center and the Reverse Engineering Laboratory of the State University of Management conducted practical training for students as part of the activities of the State University of Management Student Design Bureau “Innovative Solutions”.

During the practical lesson "Car Structure", which was conducted by the Laboratory specialist Denis Yudin, the participants not only understood the design of modern cars, but also discussed the advantages and disadvantages of different types of basic car components by design.

Vladimir Kutkov and Nikita Akinshin, specialists from the Engineering Project Management Center, spoke about the history of the development of unmanned aircraft systems, the most popular and universal designs of modern drones, the features of intelligent systems, and the autonomy of UAS during the practical course “Device of Unmanned Aerial Vehicles.”

On July 23, participants of the Summer Engineering and Economics School 2025 visited the Demikhovsky Machine-Building Plant (JSC DMZ), which is part of JSC Transmashholding.

The guests were greeted by the plant's CEO Vladimir Chekalin and HR and Transformation Director Yulia Smirnova, who spoke about the development of the enterprise, its products and the current state of production. In 2025, the Demikhovsky Machine-Building Plant celebrates its 90th anniversary since its foundation. Today, DMZ is the leading enterprise for the production of electric trains in Russia. The plant produces EP2DM DC electric trains and EP3D AC electric trains. The trains manufactured by the enterprise are successfully operated in all climatic zones of the Russian Federation, as well as in the CIS countries.

At the Exhibition Center, the excursion participants learned about the history of the Demikhovsky Machine-Building Plant, seeing documents, awards, photographs of events, employees, veterans of JSC DMZ, models of electric trains and narrow-gauge rolling stock. A unique exhibit of the museum is an interactive miniature railway, reflecting the geography of the operation of DMZ electric trains. It recreates natural landscapes and exact copies of railway stations in the regions where electric trains manufactured at the plant run – Moscow Region, the Far East, Armenia and Kazakhstan. The model presents real regions of operation and rolling stock, which is used in these areas.

Young scientists visited production shops: mechanical assembly, electrical installation, welding, wagon assembly, repair and others. In addition to the production of wagons and electric trains, the plant carries out major repairs of passenger rolling stock, manufactures wheel sets for metro cars, electric trains and rail buses.

Excursions to production facilities are traditionally an integral part of the program of the engineering and economics school. A visit to the Demikhovsky Machine-Building Plant, organized with the support and participation of the TMH Corporate University, allowed young scientists to see the work of an enterprise in the real sector of the economy, immerse themselves in the production environment and get acquainted with modern technologies and processes.

The opening of the “Summer Engineering and Economics School – 2025” was reported in this article.

Please note: This information is raw content obtained directly from the source of the information. It is an accurate report of what the source claims and does not necessarily reflect the position of MIL-OSI or its clients.

.

Translation. Region: Russian Federal

Source: Peter the Great St. Petersburg Polytechnic University –

An important disclaimer is at the bottom of this article.

On July 23, Deputy Director of the Institute of Nuclear Energy (branch) of SPbPU in Sosnovy Bor, former director of the Leningrad NPP Valery Ivanovich Lebedev passed away. He devoted more than 54 years to the cause of his life, nuclear energy.

Valery Ivanovich was born on November 3, 1947 in the city of Teikovo, Ivanovo Region. In 1971, he graduated from the Ivanovo Power Engineering Institute, specializing in "Automation of Thermal Power Processes" and was assigned to the Leningrad Nuclear Power Plant in Sosnovy Bor. At first, he worked as an engineer of control and measuring instruments and automation, then became a senior engineer of the Skala information system, a senior repairman of the Skala IVS, head of the thermal automation and measurements shop, and chief engineer of the station. And in 1996, he headed the Leningrad NPP.

Under the leadership of Valery Lebedev, the enterprise underwent large-scale modernization, many safety systems were improved and created, and for the first time in the industry, the service life of RBMK power units No. 1 and 2 was successfully extended. Valery Ivanovich actively supported cooperation with the World Association of Nuclear Operators (WANO), the IAEA and other international organizations on issues of reconstruction and improving the safety level of the Leningrad Nuclear Power Plant.

In 1998, V. I. Lebedev received the academic degree of candidate of technical sciences, and in 1999 – doctor. Since 2000, he worked as a professor of the department of "Nuclear and thermal power plants" of the power engineering faculty of the St. Petersburg State Polytechnical University, passing on his professional experience and knowledge to new generations of power engineers.

After 14 years of managing the Leningrad NPP, Valery Lebedev moved to work at the Institute of Nuclear Energy (branch) of SPbPU in Sosnovy Bor, where he was its director until 2018, then deputy.

V. I. Lebedev is the author of three scientific discoveries, 80 inventions, five monographs and over 150 scientific articles. He was a full member of the International Academy of Sciences of Ecology, Human and Nature Safety (MANEB), a full member of the Academy of Inventions and Discoveries, a full member of the International Academy of Informatization, vice-president of the Baltic Academy of Informatization, a member of the dissertation doctoral council of the All-Russian Research and Design Institute of Power Technologies (VNIPIET).

Valery Ivanovich is a laureate of the Russian Government Prize, and for his work and scientific achievements he was awarded the Order of Glory to Russia, the 1st degree honorary badge of the Russian Academy of Natural Sciences, the Peter I, P. L. Kapitsa, N. K. Roerich medals of the Manastino Institute of Nuclear Biology and Ethnography "For Contribution to Ecology", and the departmental badge "Veteran of Nuclear Power and Industry".

The passing of Valery Ivanovich Lebedev was a great loss for the scientific school of St. Petersburg and the Leningrad region, for Russian energy, and a huge loss for his family and friends. The Polytechnic University expresses its sincere condolences to the family, friends, and colleagues of Valery Ivanovich.

Please note: This information is raw content obtained directly from the source of the information. It is an accurate report of what the source claims and does not necessarily reflect the position of MIL-OSI or its clients.

.

Translation. Region: Russian Federal

Source: Official website of the State –

An important disclaimer is at the bottom of this article.

In 2025, admission to universities for bachelor's, specialist's, master's and postgraduate programs will be carried out through the "Online University Admission" service, developed by the Ministry of Education and Science of Russia, the Ministry of Digital Development, Communications and Mass Media of Russia, Rosobrnadzor and available on the "Gosuslugi" portal.

It allows applicants to submit documents to educational and scientific organizations without a personal visit.

What programs can I apply for?

An applicant can apply for budgetary (including targeted) and fee-based education, full-time, part-time and correspondence, for bachelor's and specialist's degree programs, including programs of six universities participating in the pilot project to update the higher education system.

Step by step instructions

We will tell you in more detail about the procedure for submitting an application on the State Services portal.

Step 1. Registration on the State Services portal and creation of a digital profile

A verified account is required to submit an application.

In your personal account, you can request your data on educational documents, individual achievements (IA), as well as information on disability, and then you will not have to enter them manually and confirm them with originals when submitting an application to a university.

Step 2. Filling out the application for admission

Provide information about education, benefits and special rights. Specify the desired areas of study. When applying for a bachelor's degree, specialist degree or basic higher education, you can choose up to 5 universities and up to 5 areas in each of them, including paid education. The new service "University Selection" will help you quickly find the right university, select a specialty based on subjects and USE scores, and find out the passing scores of previous years. Specify admission priorities Attach documents confirming your individual achievements and entitlement to benefits.

Details in the video instructions:

Additionally, at this stage you can choose targeted training by answering “Yes” to the corresponding question on the questionnaire.

You can find a customer for admission to targeted training on the portal "Work in Russia".

How to apply for targeted training, see the video instructions:

https://guu.ru/wp-content/uploads/05_06_2025-Кака-подача-заяку на-целебное-обучение-в-вуз_17_06_2025.mp4

Step 3. Submitting an application and tracking the status

Please check your completed application again carefully and only then submit it.

Please note that additional or internal entrance examinations must be registered separately.

In addition, universities have the right to request additional documents or ask to replace copies that are difficult to read.

Step 4: Submit consent

This can be done immediately after submitting an application on Gosuslugi, in person at the admissions office, or by sending a letter by mail.

You can submit consent on State Services starting with the application status “Submitted to the university”.

If consent has been submitted, but according to the competition lists you see that you are not eligible for the required program, or your priorities have changed, you can revoke consent and submit it to another university.

Step 5: Receive Notification of Enrollment

Once the admission orders are published, you will receive a notification of the results.

The video explains how to conclude an agreement if you are enrolling in a paid course.

Any questions left?

Find out more on the service website or ask the members of the admissions committee of the State University of Management by phone 8 (495) 371-00-55, online or in person.

Please note: This information is raw content obtained directly from the source of the information. It is an accurate report of what the source claims and does not necessarily reflect the position of MIL-OSI or its clients.

.