Financial news: On 12/15/2025, at 5:05 PM, the values of the lower limit of the repo price corridor, the carry rate, and the interest rate risk assessment range for the ZAYM (Zaymer JSC) security were changed.

Translation. Region: Russian Federation –

Source: Moscow Exchange – Moscow Exchange –

An important disclaimer is at the bottom of this article.

December 15, 2025

17:05

In accordance with the Methodology for determining the risk parameters of the stock market and deposit market of PJSC Moscow Exchange by the National Credit Center (JSC) on 15.12.2025, 17-05 (Moscow time), the values of the lower limit of the repo price corridor with the settlement code Y0/Y1Dt (up to -73.01%), the transfer rate and the range of interest rate risk assessment (up to -0.356 rubles, equivalent to a rate of 97.91%) of the ZAYM (Zaymer JSC) security were changed.

Please note: This information is raw content obtained directly from the source. It represents an accurate account of the source's assertions and does not necessarily reflect the position of MIL-OSI or its clients.

The Young House Manager competition identified the best initiatives of young citizens.

Translation. Region: Russian Federation –

Source: Official website of the State –

An important disclaimer is at the bottom of this article.

On December 13, 2025, the awards ceremony for the winners of the 3rd All-Russian Children's and Youth Competition "Young House Manager – Creator of a Favorable Living Environment" was held at VDNKh in the congress hall of the Cosmonautics and Aviation pavilion.

The competition aims to identify, mentor, and support talented young citizens who are actively involved in managing their homes, neighborhoods, neighborhoods, and schools.

During the absentee stage of the competition, more than 700 applications were submitted, containing over 110 projects for the creation of an accessible, favorable, comfortable, and safe living environment, from participants from 79 constituent entities of the Russian Federation.

The in-person stage, which took place in Moscow from December 11th to 13th, was attended by 230 contestants in the 7-9, 10-13, 14-17, and 18-25 age categories and academic supervisors from 40 regions of the Russian Federation.

The largest delegations came from Krasnodar Krai, the Republic of Bashkortostan, the Republic of Tatarstan, and the Chelyabinsk, Tyumen, and Sverdlovsk regions. The most popular categories among contestants in the 7-9 age category were "My District," among those in the 10-13 and 14-17 age categories were "My School," "My Yard," and "My District," and among those in the 18-25 age category were "My Yard" and "Information Technology and Innovation in Urban Management."

On December 11, first-year students Olga Zonova, Daria Monakhova, Olesya Parfimovich, and Yulia Frolova, as part of the Service Learning program, held a quiz and a New Year's workshop for competition participants. The workshop encouraged participants to collaborate on a project to decorate their entryway using scrap materials.

On December 12, project defenses took place at two competition venues: the State University of Management and the Moscow City Economy Complex Management Center. At the State University of Management, competition day events were held for participants aged 7 to 17 and their mentors.

On behalf of the university's leadership, the guests were welcomed by Sergei Chuev, Advisor to the Rector's Office of the State University of Management, Head of the Department of Public and Municipal Administration, and Vladimir Zotov, Advisor to the Mayor of Moscow and Professor of the Department of Public and Municipal Administration at the State University of Management.

During the defense of the contestants' projects, a scientific and practical seminar entitled "The Urban Environment of the Future: A Dream Career Begins with Managing Your City" was held for their mentors and support staff.

The competition's experts included representatives of state and municipal authorities, educational institutions, urban management specialists, and representatives of civil society institutions.

After the defense, volunteer students from among the GUU students organized an introductory tour of the university campus, and for the mentors of the contestants, Olga Kharlamova, director of the GUU scientific library, led a tour of the library's halls and archives.

The competition day concluded for all participants with a tour of the center of festive pre-New Year Moscow.

Based on the results of the tests, the authors of 80 projects became winners and prize-winners of the competition.

On December 13, the awards ceremony was opened by Svetlana Razvorotneva, Deputy Chair of the State Duma Committee on Construction, Housing, and Public Utilities. In her welcoming remarks, the deputy emphasized the importance of engaging young citizens in improvement projects for public buildings, homes, and courtyards: "It won't be long before many of these young people will be professionally involved in housing and public utilities and public welfare. Their energy and creativity will be greatly appreciated by the industry."

Alexander Kozlov, Chairman of the Moscow City Duma's Commission on State Construction and Local Self-Government and Chairman of the Council for Professional Qualifications in Housing and Public Utilities, noted that "what homes and cities should be like for future generations is something the future generation itself must decide."

Boris Khmelnikov, General Director of the Center for Municipal Economics and Deputy Chairman of the Committee on Entrepreneurship in Housing and Public Utilities of the Chamber of Commerce and Industry of the Russian Federation, congratulated the competition participants and their mentors.

Irina Milkina, Associate Professor of the Department of Public and Municipal Administration and Head of the Urban Development Project and Training Laboratory, congratulated and awarded the winners and runners-up on behalf of the State University of Management: "This year, we offered the young teams the 'Information Technologies Serving City Residents' category. And they successfully demonstrated that technology and innovation can be useful and facilitate work with big data, which is essential for developing a comfortable urban environment."

The winners and runners-up were also presented with awards by Dmitry Klimov, director of the Geek Chess online chess school for children and adults and partner of the competition; Andrey Maksimov, chairman of the competition's organizing committee and chairman of the Commission on Territorial Development, Urban Environment, and Infrastructure of the Civic Chamber of the Russian Federation; Yuri Khaikevich, development director of the Union of Small Towns of Russia; Veronika Mezhetskaya, general director of the Guild of Landscape Industry Professionals Association; and Daria Zhadobina, executive director of the competition and assistant professor in the Department of Public and Municipal Administration at the State University of Management.

The competition was included in the list of creative competitions approved by Order No. 639 of the Ministry of Education of the Russian Federation dated August 31, 2025 (clause 6.206), allowing winners and prize-winners of the competition to receive additional points when applying to universities.

The winning projects from the in-person stage of the competition have already attracted the attention of an expert jury comprised of representatives from development institutions, urban development organizations, and housing and utilities. The projects will also be recommended to local governments for further implementation in municipalities across the Russian Federation.

We congratulate all the winners and runners-up of the competition and wish them success in their professional development and self-realization!

Subscribe to the "Our GUU" Telegram channel. Publication date: December 15, 2025.

Please note: This information is raw content obtained directly from the source. It represents an accurate account of the source's assertions and does not necessarily reflect the position of MIL-OSI or its clients.

Our own people in the engineering special forces

Translation. Region: Russian Federation –

Source: Peter the Great St. Petersburg Polytechnic University –

An important disclaimer is at the bottom of this article.

Representatives from the Polytechnic University visited the rear areas of the Special Military Operations (SMO). They delivered another batch of humanitarian aid and presented certificates of advanced training to the special operation participants, the first to complete training at the Polytechnic University in five different programs. More than 100 students from the first cohort studied remotely, directly in the SMO zone.

At their unit locations, the Polytechnic guests were greeted by military personnel off duty and off combat missions. Ivan Kolomeitsev, Associate Professor of the Higher School of Social Sciences, congratulated them on their successful completion of their training and presented them with certificates and commemorative gifts from the university. The unit commanders and soldiers thanked the Polytechnic for the opportunity not only to prepare for civilian life but also to enhance their knowledge for combat missions.

"Such events help maintain the morale of personnel and instill their faith in the future. Your university once again confirms its position as a national leader and its high civic status," command representatives shared. "The online learning format allowed for the completion of programs during free time and contributed to the quality of their completion by enhancing the level of personnel training at the leading engineering university of the Russian Federation."

"The recruitment of the first cohort was preceded by a sociological survey among military personnel. Based on its results, the decision was made to launch programs that, on the one hand, meet the objectives of technological leadership and, on the other, are feasible under the established conditions. "131 people successfully completed the training, which we consider an excellent result under the circumstances. We also conducted training for Polytechnic University staff to build a talent pool for working with participants and veterans of the Second Military District," said Ivan Kurta, Head of the Directorate for Continuing Education and Industry Partnerships.

With the support of the Priority 2030 program, a survey of soldiers undergoing rehabilitation and treatment was also conducted, and career guidance tools were developed. It can already be said that the hypothesisthe need to train participants of the SVO and confirmation of this training with documents before completing service and returning to civilian life, has proven to be correct, and now it is necessary to expand the pool of training programs and methods.

The University has already generated a flow of new requests for the implementation of programs frompublic organizations, subjects of the Federation, educational organizations.

"We see a need for this type of training, but no one can say for sure which programs, learning tools, and pedagogical technologies will be successfully implemented, as there are many external factors involved, often requiring unconventional and innovative solutions. Therefore, in addition to carefully developing the programs, prompt communication with students during the pilot launch is crucial; this will allow us to clearly set goals for future cohorts," commented Dmitry Tikhonov, Vice-Rector for Continuing and Pre-University Education at SPbPU.

Please note: This information is raw content obtained directly from the source. It represents an accurate account of the source's assertions and does not necessarily reflect the position of MIL-OSI or its clients.

The Spectrum of Innovations Accelerator: The best projects were identified at Demo Day.

Translation. Region: Russian Federation –

Source: Official website of the State –

An important disclaimer is at the bottom of this article.

The State University of Management held a Demo Day for the "Spectrum of Innovations" acceleration program, where the best projects were announced. The event became a key gathering point for the innovation community, bringing together representatives of leading partner companies, development institutions, and experts.

Over the course of several months, program participants underwent an intensive educational program aimed at developing innovative products.

The accelerator, implemented as part of the federal project "Technologies" of the national project "Efficient and Competitive Economy" of the state program "Scientific and Technological Development of the Russian Federation," provided comprehensive support to project teams and student initiatives.

In total, participants developed approximately 70 business ideas during the accelerator, and approximately 400 people completed the educational program. The program included workshops, educational modules, direct interaction with partners, and other activities aimed at developing entrepreneurial competencies.

At the final event, experts were presented with the most developed projects covering three promising markets: FoodNet, SportNet, and AutoNet. Among the solutions that were presented were services for logistics optimization, car service selection, and parking space rental, the development of a smart bottle and specialized drinks for athletes, projects in gaming technology, and next-generation service stations.

The Demo Day expert jury included representatives of key program partners: Sberbank Moscow Bank, Elinar Holding Company, Arktika Trading House LLC, Chibo Park LLC, Tablogix LLC, Dream Auto LLC, and Turbokomplekt JSC. Also participating in the project evaluation were ANO Human Capital Development, Phoenix Sports Club, the Kaluga Region Agency for Innovative Development, and partners from Open Innovations Startup Studio LLC.

Following the Demo Day, all finalist teams received nominations from the organizers, and some projects received valuable prizes from partners. The top three winners were:

1st place: P2P parking service "Zaparkuy" (Robert Eremyan, Maxim Zhilyaev, Vita Kobycheva, Dmitry Leskov, Polina Roskina, Ilya Cheplya);

2nd place: RICE – a specialized AI-based platform for marketing automation and promotion in the confectionery business (Snezhanna Belova, Alexander Spirin, Alevtina Maryenko, Dilyara Mlyukova);

3rd place: SpeachGame – an import-independent messenger product for all types of gamers (Efim Kreslavsky, Egor Ryakhovsky).

The head of the acceleration program, Vice-Rector of the State University of Management, Dmitry Bryukhanov, highly praised the results achieved:

"The Demo Day was a fitting conclusion to the program. We thank our partners for their investment in the development of our projects and students. Without them, we would not have achieved such results. Going forward, we will continue to refine the program and strive to support projects that address today's most pressing challenges."

The "Spectrum of Innovations" acceleration program has confirmed its status as an effective platform for generating and developing promising technological projects, strengthening ties between the region's educational environment, business, and development institutions.

Subscribe to the "Our GUU" Telegram channel. Publication date: December 15, 2025.

Please note: This information is raw content obtained directly from the source. It represents an accurate account of the source's assertions and does not necessarily reflect the position of MIL-OSI or its clients.

Financial news: On the conditions of trading during the New Year holidays.

Translation. Region: Russian Federation –

Source: Moscow Exchange – Moscow Exchange –

An important disclaimer is at the bottom of this article.

We inform you that in connection with the conduct of trading on the stock market, deposit market and credit market during the New Year holidays on January 5, 6, 8 and 9, 2026, in accordance with the Rules for conducting trading on the stock market and deposit market of PJSC Moscow Exchange MICEX-RTS, the following has been established:

Trading on the stock market, deposit market and loan market of Moscow Exchange PJSC on January 5, 6, 8 and 9, 2026 in all the listed Sections shall be carried out taking into account the additional conditions for trading on the stock market, deposit market and loan market established by Order No. MB-P-2024-4891 dated December 1, 2025, additional conditions for trading on the bond market established by Orders No. MB-P-2025-4891 dated December 1, 2025 and No. MB-P-2025-4982 dated December 5, 2025, including the start and end times of trading in individual Trading Modes established by Order No. MB-P-2025-4891 dated December 1, 2025. The settlement price for On January 5, 6, 8 and 9, 2026, for all securities admitted to trading in the Interdealer REPO Trading Mode, the settlement price determined based on the results of trading on December 29, 2025, shall be accepted in accordance with the procedure set out in paragraph 1.3 of the Additional Terms and Conditions for Trading on the Stock Market, Deposit Market and Credit Market, approved by Order No. MB-P-2025-4891 dated December 1, 2025. The settlement price for January 12, 2026 for all securities admitted to trading in the Interdealer REPO trading mode shall be the settlement price determined based on the results of trading on December 30, 2025, in accordance with the procedure set forth in paragraph 1.3 of the Additional Terms and Conditions for Trading on the Stock Market, Deposit Market, and Credit Market, approved by Order No. MB-P-2025-4891 dated December 1, 2025. For REPO transactions concluded in the Interdealer REPO trading mode, compensation contributions on January 5, 6, 8, and 9, 2026 are not calculated. Contact information for the media: 7 (495) 363-3232PR@moex.com

Please note: This information is raw content obtained directly from the source. It represents an accurate account of the source's assertions and does not necessarily reflect the position of MIL-OSI or its clients.

RUDN University medical students won the International Festival of Student Science and High Art

Translation. Region: Russian Federation –

Source: Peoples'Friendship University of Russia

An important disclaimer is at the bottom of this article.

RUDN University medical students won prizes and runners-up at the first International Festival of Student Science and High Art, held at Omsk State Medical University. The event, organized as part of the Decade of Science and Technology in the Russian Federation, was jointly hosted by the Omsk State Medical University's Department of Orthopedic Dentistry and our university's Department of Orthopedic Dentistry.

The festival became a living embodiment of the thesis "dental science and practice as art." It provided a platform for mastering and demonstrating diagnostic methods and manual skills using digital technology, combined with immersion in the world of music and fine art.

Six student teams from universities in Perm, Yekaterinburg, Moscow (RUDN University), Almaty, Novosibirsk, and Omsk participated in the festival competition. A distinguished jury comprised of leading experts in orthopedic dentistry evaluated the participants' work. Among them were Igor Lebedenko, Head of the Department of Orthopedic Dentistry at RUDN University, and Vitaly Parunov, Professor of the same department.

Dentistry and Tchaikovsky

The first day's program included a presentation of the universities' business cards and a student olympiad. Participants demonstrated their skills in digital diagnostics of the functional state of the dental system, stomatoscopy, and manual tasks such as making a silicone key, preparation, photodiagnostics, taking optical impressions, and making temporary crowns. The festival's evening program introduced guests to the Omsk Symphony Orchestra, which performed works by P.I. Tchaikovsky, G.V. Sviridov, and A.P. Petrov. On the second day, a student research paper competition took place, where young researchers presented works reflecting contemporary trends in science and practice. The festival concluded with the opening of an exhibition of selected graphic works from the collection of Professor A.A. Stafeev, "From the Great Piranesi to the Art Deco Genius Erté." The House of Artists featured over 100 original works, ranging from etchings by Giovanni Battista Piranesi to works by Art Deco artists, allowing participants to experience high art.

Among the best

RUDN University students demonstrated excellent results in the individual competition at the festival:

Elizaveta Kovrizhkina, a fifth-year Dentistry student, took first place in the "Temporary Crown Fabrication" category. Valeria Maltseva, a fifth-year Dentistry student, took third place in the "Tooth Preparation" category.

The winners shared their impressions.

"Some stages of the competition were a revelation for me: we were tested on our interdisciplinary thinking and creativity. We had practiced our manual skills in orthopedic dentistry many times in our departmental classes, so we were prepared to present our work with distinction. The unfamiliar environment and the new team were nerve-wracking, but once we became friends with all the participants, the atmosphere became very warm. I was surprised to see healthy competition and even friendships develop between all the participants," says Elizaveta Kovrizhkina.

"I went to the festival primarily wanting to test my skills. The atmosphere was amazing: so many talented, friendly, and passionate people! I developed good, trusting relationships with everyone. I hope to see them again! Winning a prize in dissection is a huge honor for me and motivates me to continue developing. The only challenge during this task was finding the balance between under-dissecting and over-dissecting. This was the only thing that caused a little anxiety: you're not imagining a phantom, but a real person who has approached you with a problem, and your main goal is to help them," says Valeria Maltseva.

All competition participants and winners were awarded diplomas, valuable gifts, and books published by leading Russian professors. RUDN University is proud of its contribution to the event and the achievements of its students.

Please note: This information is raw content obtained directly from the source. It represents an accurate account of the source's assertions and does not necessarily reflect the position of MIL-OSI or its clients.

The government has approved target indicators for Russia's technology policy.

Translation. Region: Russian Federation –

Source: Government of the Russian Federation – Government of the Russian Federation –

An important disclaimer is at the bottom of this article.

Document

Resolution of December 5, 2025 No. 1990

Prime Minister Mikhail Mishustin signed a decree approving a list of target indicators for ensuring Russia's technological leadership, medium- and long-term technology development in economic sectors, as well as rules for calculating them and monitoring their achievement.

The main goal of the document is to create a unified system for assessing Russia's technological development to achieve national goals and implement the new federal law "On Technological Policy."

Target indicators for ensuring technological leadership characterize the development of high-tech products and the technologies necessary for their creation, and form the basis for assessing the effectiveness of Russia's technological policy.

The new resolution defines the country's level of technological independence and its level of technological superiority over foreign analogues in priority high-tech products using such indicators.

The achieved level of technological independence and technological superiority are designated as target indicators for the medium-term and long-term development of technologies in economic sectors.

Work to achieve target indicators will be carried out within the framework of national projects to ensure technological leadership, medium- and long-term technology development plans, projects to develop cross-cutting technologies, and innovative development programs for organizations with state participation.

Speaking about the decision made at a meeting on the implementation of technology policy held on December 15 at the Technopolis Moscow SEZ, Mikhail Mishustin noted that the comprehensive system for assessing technological development will demonstrate the progress of the development of high-tech solutions and products based on domestic technologies, determine the country's level of independence in priority developments, and characterize our level of leadership when compared with foreign counterparts. The metrics approved by the resolution will be integrated into national projects and will serve as benchmarks for bringing product performance up to the best international standards.

Please note: This information is raw content obtained directly from the source. It represents an accurate account of the source's assertions and does not necessarily reflect the position of MIL-OSI or its clients.

Mikhail Mishustin held a meeting on the implementation of technology policy.

Translation. Region: Russian Federation –

Source: Government of the Russian Federation – Government of the Russian Federation –

An important disclaimer is at the bottom of this article.

M. Mishustin:

"To accelerate the growth of industries, regions, and the economy as a whole, it's important to continue implementing breakthrough ideas and developing a strong industrial base. Advanced solutions must be widely adopted and replicated across all sectors so that their use improves the quality of Russian goods and services and helps make the lives of our citizens more convenient and comfortable."

To be continued.

Please note: This information is raw content obtained directly from the source. It represents an accurate account of the source's assertions and does not necessarily reflect the position of MIL-OSI or its clients.

Mikhail Mishustin visited the practical training center for mechanical engineering at the Technopolis Moscow SEZ.

Translation. Region: Russian Federation –

Source: Government of the Russian Federation – Government of the Russian Federation –

An important disclaimer is at the bottom of this article.

The Prime Minister toured the center's production workshops and laboratories, spoke with students, and watched presentations on training in the secondary vocational education system.

Advanced training programs, workshops equipped with modern equipment, and close collaboration with future employers will ensure high-quality training for sought-after specialists.

The center's floor space exceeds 3,000 square meters, allowing it to train over 1,500 people annually. Over the course of their studies (2 years and 10 months), each student will receive 2,000 hours of in-depth practical training. This represents approximately 65% of the total time allocated for developing professional skills.

Previously, from 2018 to 2023, the site housed a multidisciplinary college. In 2023, design work was completed in collaboration with employers. In 2024–2025, the site was reorganized into a practical training center.

In the 2025/2026 academic year, students from six colleges will study at the site:

GBPOU "Moscow State Educational Complex"; GBPOU "Polytechnic College named after P.A. Ovchinnikov"; GBPOU "Moscow Technological College named after I.A. Likhachev"; GAPOU "Polytechnic College No. 8 named after I.F. Pavlov"; GBPOU "Moscow Publishing and Printing College named after I. Fedorov"; GBPOU "Moscow Industrial College".

Students will be able to master three in-demand specialties, gaining additional qualifications in each:

Mechanical Engineering Technology. Occupations: 3rd-category turner, 3rd-category milling machine operator, 2nd-category grinder, 4th-category CNC machine operator. Machine tool setup operator. Occupations: 3rd-category turner, 3rd-category milling machine operator, 4th-category CNC machine operator. Installation, maintenance, operation, and repair of industrial equipment (by industry). Occupation: 4th-category CNC machine operator.

Unique features of the center:

Co-location with industrial partners—future employers. Involvement of specialists from Technopolis Moscow SEZ residents to train students. Students solve production problems at Technopolis Moscow SEZ residents, and drawings of real components are included in practical projects. The entire manufacturing cycle is carried out using Russian software, from drawing creation to generating a quality report on the finished product.

The center houses a high-tech complex, including five workshops equipped with 69 machines, as well as three laboratories:

Workshop of milling machines with numerical control. The equipment allows processing of medium- and large-sized parts in accordance with professional standards.
Workshop of lathes with numerical control. The equipment is distinguished by its versatility – it can efficiently perform all basic (roughing and finishing) turning operations: external turning, drilling, boring, cutting, threading.
Workshop of universal milling machines. The equipment allows for complex processing of parts with complex geometry, including milling, drilling, boring and other technological operations.
A workshop of universal lathes, the equipment of which allows students to gain practical skills on real production equipment, which significantly reduces the adaptation period when moving to work in industry.
A workshop of special machines with a materials science department, in which machines allow high-precision processing of various types and types of parts.
An area with a laser complex for high-speed cutting of sheet metals (part of the special machines workshop). Students hone their laser cutting skills for a variety of sheet materials up to 8mm thick with high precision. The work includes creating a control program that sets the trajectory of the laser and the intensity of its radiation, setting up equipment, subsequent cleaning and processing of manufactured semi-finished products.
Drawing laboratory. Here students develop practical skills in technical drawing, which are the foundation for working with design documentation and creating three-dimensional models of parts and the final product. They also receive access to the next stage of the technological process of manufacturing a part in the computer-aided design laboratory.
The laboratory of computer-aided design systems is equipped with modern software.
The metrology laboratory is equipped with modern measuring equipment and professional tools that provide precise quality control of products and assembly units.

Practical classes are taught by 16 experienced and competent industrial training instructors from the college, as well as six current employees of residents of the Technopolis Moscow SEZ: UEC-Salut, a branch of UEC JSC, SKTB PR LLC, TZMOI JSC, NPP Toriy JSC, and Mikrobor LLC. Each student has access to state-of-the-art equipment.

Please note: This information is raw content obtained directly from the source. It represents an accurate account of the source's assertions and does not necessarily reflect the position of MIL-OSI or its clients.

Financial news: 12/15/2025, 14-11, the values of the lower limit of the repo price corridor, the carry rate and the range of interest rate risk assessment for the LEAS (Europlan) security were changed.

Translation. Region: Russian Federation –

Source: Moscow Exchange – Moscow Exchange –

An important disclaimer is at the bottom of this article.

December 15, 2025

14:11

In accordance with the Methodology for determining the risk parameters of the stock market and the deposit market of PJSC Moscow Exchange by the National Credit Center (JSC) on 15.12.2025, 14-11 (Moscow time), the values of the lower limit of the repo price corridor with the settlement code Y0/Y1Dt (up to -151.01%), the transfer rate and the range of interest rate risk assessment (up to -2.76 rubles, equivalent to a rate of 183.7%) of the LEAS (Europlan) security were changed.

Please note: This information is raw content obtained directly from the source. It represents an accurate account of the source's assertions and does not necessarily reflect the position of MIL-OSI or its clients.